Festo CPX-FB32 Electronic Manual page 41

2. Commissioning
Pneumatic modules and
pneumatic interfaces
Pneumatic interface for CPA valves
(type 12) with setting:
1...8 valve coils
1...16 valve coils
1...24 valve coils (22 can be used)
Pneumatic interface for Midi/Maxi
valves (type 03) with setting:
1...8 valve coils
1...16 valve coils
1...24 valve coils
1...32 valve coils (26 can be used)
Pneumatic interface for VTSA
pneumatics (ISO, type 44)
1...8 valve coils
1...16 valve coils
1...24 valve coils
1...32 valve coils
1)
Module identifier in the Handheld
2)
Setting with DIL switch in the pneumatic interface (see manual for CPX I/O modules)
3)
Depending on the version of the Handheld
Tab. 2/4: Overview of pneumatic modules and pneumatic interfaces (part 2)
Festo P.BE−CPX−FB32−EN en 0605NH
Type
CPX−GP−CPA−10
3)
CPX−GP−CPA−14
CPX−GP−03−4.0
2)
VABA−10S6−x1
2)
The address assignment within the pneumatic modules can
be found in the manual for the valve terminal pneumatics.
Further information on MPA pneumatic modules can be found
in the manual for the CPX I/O modules (P.BE−CPX−EA−...).
Module Assigned
1)
identifier addresses
Inputs
CPA10/14
TYPE3
ISO PlugIn or
3)
type 44
Outputs
8 O
16 O
24 O
8 O
16 O
24 O
32 O
8 O
16 O
24 O
32 O
2−7