Vecow SPC-5000 User Manual page 24

2.2.2.2 Power Button
The power button is a non-latched switch. In case of system halts, you can
press and hold the power button for 4 seconds to compulsorily shut down the
system. Please note that a 4 seconds interval is kept by the system between
two on/off operations (i.e. once turning off the system, you shall wait for 4
seconds to initiate another power-on operation).
2.2.2.3 PWR and HDD LED Indicator
Yellow-HDD LED : A hard disk LED. If the LED is on, it indicates that the system's
storage is functional. If it is off, it indicates that the system's storage is not functional.
If it is flashing, it indicates data access activities are in progress.
Green-Power LED : If the LED is solid green, it indicates that the system is
powered on.
LED Color
Yellow
Green
2.2.2.4 DVI Connector
The DVI output mode supports up to 1920 x 1080 resolution. The DVI is
automatically selected according to the display device connected. You will need
a DVI-D cable when connecting to a display device.
©Vecow SPC-5000 User Manual
LAN LAN
LAN LAN
Indication
HDD
Power
LAN LAN
DVI DP
On | Off
IGN
DVI DP
On | Off
IGN
System Status
• On/Off : Storage status, function or not.
• Twinkling : Data transferring.
System power status (on/off)
DVI DP
On | Off
IGN
GETTING TO KNOW YOUR SPC-5000
PoE
LAN
Isolated DIO
PoE
LAN
DIO
Isolated
PoE
LAN
DIO
Isolated
17