Vecow SPC-5000 User Manual page 28

GPI SOURCE Mode
Digital GPI input signal circuit in SOURCE mode (PNP) is illustrated as follow :
GPI SOURCE Mode
Digital GPI input signal circuit in SOURCE mode (PNP) is illustrated as follow :
Internal Circuit
2.2.2.11 PoE (Power over Ethernet)
There are 2 RJ45 connectors in the rear side of SPC-5200. It supports IEEE
802.3af Power over Ethernet (PoE) connection delivering up to 15.4W/54V per
port (Total : 25W) and 1000BASE-T gigabit data signals over standard Ethernet
Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
POE_LED1/POE_LED2
©Vecow SPC-5000 User Manual
Power Supply
+24V
24V
DC
0V
9
COM
1
IN_0
LED
LAN LAN
POE LED
Internal Circuit
+5V
T
R
G
DVI DP
On | Off
IGN
®
I210 Gigabit Ethernet controller and
LED Color
Solid Orange
GETTING TO KNOW YOUR SPC-5000
SINK
11
OUT_0
10
EGND
20
E24V
PoE
LAN
DIO
Isolated
POE Status
POE ON
21