Vecow SPC-5000 User Manual page 34

2.4.1.4 JUSB1, JUSB2 : Internal USB 2.0 Connector
The EMBC-3000 main board provides maxima eight expansion USB ports. The
USB interface supports 480Mbps transfer rate which comply with high speed USB
specification Rev. 2.0.
The USB interface is accessed through one 10-pin JST 1.0mm connector. You will
need an adapter cable if you use a standard USB connector. The adapter cable
has a 10-pin connector on one end and a USB connector on the other.
The pin assignments of JUSB1 and JUSB2 are listed in the following table :
JUSB1
10
JUSB2
10
©Vecow SPC-5000 User Manual
Pin No. Definition
1 USB_VCC
3 USB_VCC
5 USB_D_4P
1
7 USB_D_5P
9
Pin No. Definition
1 USB_VCC
3 USB_VCC
5 USB_D_6P
1
7 USB_D_7P
9
JUSB2
JUSB1
Pin No.
2
4
6
8
GND 10
Pin No.
2
4
6
8
GND 10
GETTING TO KNOW YOUR SPC-5000
Definition
USB_VCC
USB_D_4N
USB_D_5N
GND
GND
Definition
USB_VCC
USB_D_6N
USB_D_7N
GND
GND
27