Vecow SPC-5000 User Manual page 26

2.2.2.8 10/100/1000 Mbps Ethernet Port
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN at right side is powered by Intel
Ethernet Phy; LAN at left side is powered by Intel
both of LANs work in normal status, iAMT function is enabled. Using suitable
RJ-45 cable, you can connect the system to a computer, or to any other devices
with Ethernet connection, for example, a hub or a switch. Moreover, both of
LANs support Wake on LAN and Pre-boot functions.
2.2.2.9 Remote Power On/Off Switch and Ignition Control
It is a 3-pin power-on/power-off switch through Phoenix Contact terminal block.
You could turn on or off the system power by using this contact. This terminal
block supports dual function on soft power-on/power-off (instant off or delay four
seconds), and suspend mode. Another function is provided ignition power control
feature for in-vehicle applications. The built-in MCU monitors the ignition signal and
turns on/off the system according to pre-defined on/off delay period.
©Vecow SPC-5000 User Manual
LAN LAN
LAN LAN
1 2 3
DVI DP
On | Off
IGN
®
I210 Ethernet engine. When
DVI DP
On | Off
IGN
Pin No.
1
2
3
GETTING TO KNOW YOUR SPC-5000
PoE
LAN
Isolated DIO
®
i219
PoE
LAN
Isolated DIO
Definition
Ignition (IGN)
SW+
SW-
19