Vecow SPC-5000 User Manual page 39

2.4.1.10 CN13 : LAN1 + LAN2
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side of EMBC-3000. LAN1 is powered by Intel
Ethernet engine; LAN2 is powered by Intel
LAN1 and LAN2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect EMBC-3000 system to a computer
or to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both LAN1 and LAN2 supports Wake on LAN and Pre-boot functions.
The pinouts of LAN1 and LAN2 are listed as follow :
Pin No.
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
Right
Left
©Vecow SPC-5000 User Manual
10/100 Mbps
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
10Mbps
Green/
Off
Orange
Twinkling
Green
Green
®
I210-IT Ethernet engine. When both
LAN1
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
100Mbps 1000Mbps
Solid Solid
Green Orange
Twinkling Twinkling
Green Green
GETTING TO KNOW YOUR SPC-5000
®
I219-LM
LAN2
CN13
1 8
32