The Arc Assembly A And Its Different Types Of Connector - IBM 3745 Series Connection And Integration Manual

o
11
o
o
o
o
Step 6
Repeat. Steps 2, 4, and 5 for every ARC you want to remove.
If you have no ARC to install, go to Step 17 on page 3-23.
Otherwise, continue with next step to install an ARC.
Step 7
Identify the ARC physical interface type
An ARC cable terminates with one of the following connectors:
• IBM 3745 type
• ITU-T interface type:
- V.24
- V.35
- X.21.
The interface label on the front of the ARC identifies the ITU-T
interface type (see Figure 3-15).
Figure 3-15 shows the different types of ARC cable connector.
ARC Assembly A
V.24
,V.35
X.21
IBM 3745
Figure 3-15. The ARC Assembly A and Its Different Types of Connector
Step 8 Label the ARC cable
a. Verify that the following information about each ARC from the
plugging sheets is on a pair of ARC labels (part number 63F2505):
• LCB:
- Number
- Location
• IBM 3746-900 name
• Range of the LlC 11 addresses.
• Connector slot position (+0 to +14 or +16 to +30)
• Symbolic line name.
Chapter 3. 3746-900: Installing LCSs and ARCs, Connecting Cables
3-21