IBM 3745 Series Connection And Integration Manual page 30

o
o
o
o
o
Step 3
Plugging in an AUI cable
Repeat this step for every AUI to be plugged in.
Note: Make sure that all the cables are correctly labeled at both ends
before doing this step.
1. Locate a cable with a label. Find the port that matches the cable.
2. Slide the latch to the right (the open padlock position).
3. Hold the cable connector so that its longest side is downward.
Chapter 1. 3745 Models 210 to 61A: Connecting LlCs and Cables
1-9