IBM 3745 Series Connection And Integration Manual page 52

o
o
o
o
o
Step 2
Unplugging an AUI cable
Repeat this step for every AUI cable to be unplugged.
1. Locate the port.
{
®
r\
tID
r\-
~ 1 ~1
1061~ 106~
® \ \
tID
~
~ 2 ~2
1060 1062
2. Unlock the cable by sliding the latch upwards and to the left (the
open padlock position). It may require a lot of force to move it.
3. Pull out the plug.
If you are going to plug in a new cable, continue with the next step.
Otherwise, go to Step 5 on page 2-7.
Chapter 2. 3745 Models 130 to 17A: Connecting LlCs and Cables
2-5