Connector Locations - IBM ServeRAID User Reference

Feature
Supported RAID levels
System PCI data bus
The ServeRAID controllers support the following features of ServeRAID software
and utility programs.
ServeRAID features
ServeRAID ROM Update
Wizard
ServeRAID Manager
ServeRAID
Mini-Configuration program
IPSSEND
®
IPSSEND FlashCopy
function (Windows XP
Professional, Windows
2000, and Windows NT
only)
IPSMON (NetWare only)
Clustering (Windows NT
and Windows 2000 only)
Failover (Windows NT and
Windows 2000 only)

Connector locations

This section provides illustrations of the SCSI channel connectors and cable
connectors for the ServeRAID-4H, ServeRAID-4Mx, ServeRAID-4Lx, and
ServeRAID-5i controllers.
The light-emitting diodes (LEDs) on the controllers indicate activity on the SCSI
channels and provide diagnostic information for trained service technicians.
ServeRAID-4H controller
The ServeRAID-4H controller has four independent SCSI channel connectors:
Channel 1, Channel 2, Channel 3, and Channel 4. Each of these SCSI channels
supports up to 15 physical devices.
Note: In the event of a power outage or failure, the battery-backup cache protects
4
IBM ServeRAID: User's Reference, Version 5.10
ServeRAID-5i ServeRAID-4H
0, 1, 5, Enhanced-1 0, 1, 5, Enhanced-1
(1E), 00, 10, 1E0, (1E), and
50 Enhanced-5 (5E),
00, 10, 1E0, 50
64 bit at 66 MHz 64 bit at 33 MHz
ServeRAID-5i ServeRAID-4H
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
No Yes
No Yes
the data stored in the ServeRAID cache memory when using the write-back
setting of the write-cache mode.
ServeRAID-4Mx ServeRAID-4Lx
0, 1, 5, Enhanced-1 0, 1, 5, Enhanced-1
(1E), and Enhanced-5 (1E), and
(5E), 00, 10, 1E0, 50 Enhanced-5 (5E),
00, 10, 1E0, 50
64 bit at 33 to 66 64 bit at 33 to 66
MHz MHz
ServeRAID-4Mx ServeRAID-4Lx
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes