Part 1. Connecting - IBM 3745 Series Connection And Integration Manual

II
I:
~
1\
o
o
o
o
o
Part 1. Connecting
This part consists of three chapters which describe the procedures for changing
user-accessible hardware (located in a reserved area) by qualified customer
personnel:
• Chapter 1,3745 Models 210 to 61A: Connecting LlCs and Cables, and
• Chapter 2,3745 Models 130 to 17A: Connecting LlCs and Cables, describe
the procedures for changing:
- Line interface couplers
- Line interface coupler cables
- High-speed scanner cables
- Token-ring adapter cables
- Ethernet LAN AUI cables
- Operator console cables
- Remote support facility cable
- Customer power control cable.
• Chapter 3,3746-900: Installing LCBs and ARCs, Connecting Cables, describes
the procedures for changing:
- Ethernet Bridge cables
- Multiaccess Enclosure cables
- Token-ring interface coupler type 3 cables
- Line interface coupler types 11, 12, and 16 cables
- Line connection boxes (LCBs)
- Active remote connection (ARC) assemblies and cables.
These procedures are performed at initial installation and durtng later modifications
of your 3745,3745 Models A and 3746-900.
Initial installation refers to the first installation of your 3745, 3745 Models A and
3746-900 or its re-installation after moving the machine. This is done with the help
of the IBM service representative.
Later modifications refer to changes made at any other time. These later
modifications do not require a service representative.
Notes:
1. While using the procedures in this part, the 3745/3746-900 can be powered
ON.
2. For the 3746-900, only the TIC3 cables can be changed by the user. Adding,
removing, or changing the TIC3s themselves is done by the IBM service
representative.
© Copyright IBM Corp. 1988, 1997