IBM 3745 Series Connection And Integration Manual page 111

Step 18
Write down the line adapter (LA) number and type for each line adapter
0.- . . '
to be displayed or updated.
Step 19
§] §]
Step 20
0 (
Enter
I
Step 21
Enter the LA number (1 through 32):
o
0
(Enter
I
If the type of line adapter displayed is:
• TSS (a LlC), then to display or update the information for that line
adapter, go to Step 23 .
•. HSS, then to display or update the information for that line adapter,
go to Step 27 on page 5-13.
• ELA or TRA, then you can only display the information for that line
adapter. Continue with the next step.
Step 22
When you have finished with the ELA or TRA display, to display or
update another line adapter:
§]
Repeat Step 21
Otherwise:
EJ
You have finished this procedure. Continue with other integration
procedures.
Step 23
If you want to:
5-12
3745 All Models & 3746-900:CIG
• Only display more TSS (LlC) information, without making any
changes on this screen:
§]
Repeat Step 21
• Save any connection changes made:
~
Continue with the next step.
• Quit this procedure without saving any changes you may have
made:
EJ
You have finished this procedure, do no more Steps. Continue with
other integration procedures.
Note: You must at least do "Saving MOSS from Fixed Disk onto
Diskettes" on page 5-19 when you have finished all other
integration procedures.
/