Fcc - Siemens SIMATIC NET RUGGEDCOM RST2228P Installation Manual

Certification
6.1.3 FCC
•
•
•
•
•
•
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to
6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case users will be required to correct the
interference at their own expense.
42
EN 61000-3-2
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic cur-
rent emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems,
for equipment with rated current ≤16 A per phase and not subject to conditional
connection
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 55032
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic Prod-
ucts with Respect to the Restriction of Hazardous Substances
"Contacting Siemens (Page vii)".
Installation Manual, 12/2019, C79000-G8976-1403-05
RUGGEDCOM RST2228P