European Union (Eu); Fcc - Siemens SIMATIC NET RUGGEDCOM i803 Equipment Manual

Certification
6.1.2 European Union (EU)
6.1.2

European Union (EU)

This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
•
•
•
•
•
The device is marked with a CE symbol and can be used throughout the European
community.
6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
28
EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 63000
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
CISPR 32/EN 55032
Electromagnetic Compatibility of Multimedia Equipment – Emission
Requirements
NOTICE
RUGGEDCOM i803
Equipment Manual, 10/2023, C79000-G8976-1005-09