4.2.12 PPPoE Configuration
This section introduces how to configure PPPoE configuration. The screen in
The Page includes the following fields:
Object
PPPoE Service
PPPoE Relay Circuit ID
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
: Click to reset IP address to default setting.
Input Variance
Characters
${Line}
${Vid}
Figure 4-2-15: PPPoE Configuration Page Screenshot
Description
Allows user to enable or disable PPPoE service.
It specifies unique ID to distinguish which devices that traffic comes from.
Combination format: string- ${Line}:${Vid} (refer to Table 4-2-1). Acceptable signs
include: "/",",",": ","\" and so on. Default: Null
Description
String
Line
VLAN ID of the bridge port
Table 4-2-1: PPPoE Variance
Figure 4-2-15
Length: 255 characters
Display Channel (1~N)
VLAN ID (Default VID would be applied if no
VLAN ID has been set.)
- 41 -
appears.
Remarks