Table of Contents
Advertisement
The DSLAM can be configured through an Ethernet connection, making sure the manager PC must be set on the same IP
subnet address with the DSLAM.
For example, the default IP address of the DSLAM is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where
x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the DSLAM to 192.168.1.1 with subnet mask 255.255.255.0 via console, then the
manager PC should be set at 192.168.1.x (where x is a number between 2 and 254) to do the relative configuration on manager
PC.
The DSLAM supports out-of-band management. Please connect your manager PC to EMS port
for accessing the Web UI.
Logging on the DSLAM
1.
Use Internet Explorer 7.0 or above Web browser. Enter the factory-default IP address to access the Web interface. The
factory-default IP address is shown as follows:
http://192.168.0.100
2.
When the following login screen appears, please enter "admin" for both default username and password (or the
username and password you have changed via console) to login the main screen of DSLAM. The login screen in
4-1-2
appears.
Figure 4-1-1: Web Management
- 24 -
4. WEB CONFIGURATION
Figure
Advertisement
Table of Contents
