4.8.11 Out-of-Band Management
This section is to introduce you about how to configure out-of-band management. This network configuration page is for you to
connect to EMS port and manage this device. You can't manage this device from GE port or alarm IN/OUT port. The screen in
Figure 4-8-11
appears.
The page includes the following fields:
Object
IP Address
Subnet Mask
Gateway
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
: Click to reset IP address to default setting.
Figure 4-8-11: Out-of-Band Management Page Screenshot
Description
Allows user to set IP address. It supports IPv4 only.
Allows user to set subnet mask.
Allows user to set gateway IP address.
- 100 -