Table of Contents
Advertisement
UPBO U0 band Psd B
UPBO U1 band Psd B
UPBO U2 band Psd B
UPBO U3 band Psd B
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values. User has to input new created profile
name then you can get back the new created profile configuration.
: Click to reset IP address to default setting.
: Click to delete current xDSL profile.
: Click to delete all xDSL profiles.
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.
This configuration parameter defines the 'b' reference parameter of the UPBO
reference PSD used to compute the upstream power back-off for the upstream
band. A UPBO PSD defined for each band shall consist of two parameters [a,
b]. Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded
as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0)
to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO
reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b
(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.
- 68 -
Advertisement
Table of Contents
