Protocol Type
Service Type
Service Type Value
VLAN ID
Ether Type
TCP/UDP Src. Port
TCP/UDP Dst. Port
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values. Input new created group name then
you can get back the new created group configuration.
: Click to reset IP address to default setting.
: Click to delete current xDSL profile.
: Click to delete all xDSL profiles.
Allows user to indicate protocol type number. User has to translate the protocol number
from Hexadecimal To Decimal.
Ex.
Protocol Number
Protocol Name
(Hexadecimal)
0x01
ICMP
0x02
IGMP
0x06
TCP
0x11
UDP
Allows user to indicate service type. Default: CoS
None / Cos / ToS / DSCP / Precedence
Allows user to indicate service type value; it is from 0 to 63. Default: 0
Allows user to indicate VLAN ID; it is from 0 to 65536. 0 is ignoring. Default: 0
Allows user to indicate ether type number. Default: 0
Allows user to indicate TCP/UDP source port. 0 is ignoring. Default: 0
Allows user to indicate TCP/UDP destination port. 0 is ignoring. Default: 0
- 60 -
Decimal
1
2
6
17