Planet XDL-2420R User Manual page 38

 IGMP Fast Leave
 IGMP Leave Timeout
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
: Click to reset IP address to default setting.
Please make sure that when multicast stream input to GE#1 and GE#2 ports, it should be tagged VID then IGMP Snooping is
going to control the multicast stream and to avoid it flooding to CPE side. Also XDL-2420R should be enabled VLAN feature.
For example, two VC-231 CPE devices want to access the multicast stream from the multicast stream source and we won't
multicast stream flooding to the other port.
We leave IGMP Snooping, IGMP Channel Profile Apply and IGMP Channel Profile configuration to default, but we have to set
up VLAN to port1 and port2. The configuration example is as following. You can check IGMP group table and IGMP Snooping
table from "Static" option in menu tree.
[Topology]
Allows user to disable or enable IGMP fast leave mode for leaving multicast stream
immediately or leaving multicast stream according to IGMP Leave Timeout
configuration.
Allows user to set IGMP leave time out as default is 300 seconds.
- 38 -