Planet XDL-2420R User Manual page 12

xDSL Features
POTS Splitter
Layer 2 Functions
Management Interface
IGMP Snooping
Multicast
VLAN
Link Aggregation
QoS
Access Control List
Standards Conformance
Regulation Compliance
Standards Compliance
Cables
SNMP MIB
Environment
Temperature
Humidity
Selectable rate limit control
Selectable target SNR (signal to noise ratio) mode
POTS voices pass-through
Compliant with ETSI TS 101 952-1-1 option A for European
The splitter is passive element.
Web browser, Telnet
IGMP v2, Fast Leave
Supports up to 256 multicast groups
IEEE 802.1Q Tag-based VLAN
IEEE 802.1ad Q-in-Q VLAN
Static port trunk with 1 group of 2-port trunk
8 priority queue
Traffic classification based on
- Port priority
- TOS to Q-in-Q VLAN priority
Layer 2 / 3 / 4 ACL
FCC Part 15 Class A, CE
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE- SX / LX
IEEE 802.3ab 1000BASE-T
IEEE 802.1ad Q-in-Q VLAN tagging
ITU-T G.993.2 VDSL2 (Profile 30a Support), Annex A/B
ITU-T G.992.1 ADSL
ITU-T G.992.3 ADSL2
ITU-T G.992.5 ADSL2+
RFC 768 TFTP
RFC 783 IP
RFC 791 ICMP
RFC 792 Telnet
RFC 854 HTTP

VDSL2: twisted-pair telephone wires (AWG24 or better) up to 1.4km

10/100BASE-TX: 2-pair UTP Cat.5, up to 100m (328ft)

1000BASE-T: 4-pair UTP Cat.5E, up to 100m

1000BASE-SX: 50/125µm and 62.5/125µm fiber optic cable, up to 550m

1000BASE-LX: 9/125µm fiber optic cable, up to 10km 50/125µm and
62.5/125µm fiber optic cable, up to 550m
Private MIBs
0~50 degrees C
5~90% (non-condensing)
- 12 -