4.3.5 Modify Alarm Severity
This section introduces how to configure Modify Alarm Severity. Define alarm severity is going to help user to manage which
alarm severity level should be outputted to what alarm out group. The screen in
As built-in alarm output assignment to "ALARM OUT" port is as following table.
For example, if user set "FAN_Fail_Alarm" severity to "Minor" then "External Alarm OUT3" will be triggered when XDL-2420R
fan has stopped.
If user set "FAN_Fail_Alarm" severity to "Critical" then "External Alarm OUT1" will be triggered when XDL-2420R fan has
stopped.
Object
External Alarm OUT1
External Alarm OUT2
External Alarm OUT3
External Alarm OUT4
Severity Definition
Critical
Major
Minor
For audio alarm device only. (Use "Operate Alarm Cut Off"
can control the alarm out immediately.)
- 71 -
Figure 4-3-5
appears