Table of Contents
Advertisement
4.2.14 xDSL Line Profile
This section introduces how to configure xDSL Line Profile. xDSL Line Profile contains parameters for configuring VDSL and
ADSL lines. As a managed node can handle a large number of CPE, (e.g., hundreds or perhaps thousands of lines),
provisioning every parameter on every CPE may become burdensome. A profile is a set of parameters that can be shared by
multiple lines using the same configuration.
One or more lines may be configured to share parameters of a single profile by setting their vdslLineConfProfile objects to the
value of this profile. If a change is made to the profile, all lines that refer to it will be reconfigured to the changed parameters.
Before a profile can be deleted or taken out of service it must be first unreferenced from all associated lines.
Implementations MUST provide a default profile with an index value of 'DEFVAL' for each profile type. Before a line's profiles
have been set, these profiles will be automatically used by default profile. This default profile name, 'DEFVAL', is considered
reserved in the context of profiles defined in system.
Profile changes MUST take effect immediately. These changes MAY result in a restart (hard reset or soft restart) of the units on
the line.
The screen in
Figure 4-2-17
appears.
- 45 -
Advertisement
Table of Contents
