External Alarm State - Planet XDL-2420R User Manual

24-port vdsl2 / adsl2+ ip dslam

Hide thumbs Also See for XDL-2420R:

Table of Contents

4.3.7 External Alarm State

This section shows you external alarm state table. If an alarm is triggered, the state will be shown "ON" and the alarm group

wire will be opened. As "Normal" state, the alarm group wire will be closed. The screen in

Please note that when alarm in or alarm out has triggered, also the external alarm out4 is

triggered at the same time.

Figure 4-3-7: External Alarm State Page Screenshot

- 78 -

Figure 4-3-7

appears

Table of Contents