Table of Contents
Advertisement
Figure 2-4
shows how to attach brackets to one side of the DSLAM.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
Step3:
Secure the brackets tightly.
Step4:
Follow the same steps to attach the second bracket to the opposite side.
Step5:
After the brackets are attached to the DSLAM, use suitable screws to securely attach the brackets to the
in
Figure
2-5.
Step6:
Proceeds with steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to
the DSLAM.
Figure 2-4: Attach Brackets to the DSLAM.
Figure 2-5: Mounting DSLAM on a Rack
- 17 -
rack, as shown
Advertisement
Table of Contents
