4.8.12 Remote Management
This section is to introduce you about how to configure remote management. It offers you to enable SNMP or WEB GUI for
management. For security reason, user may need to change standard TCP port number from 80 (for HTTP service) or 161 (for
SNMP service) to the other port. The SNMP MIBs support XDL-2420R private MIB only and it offers user to monitor VDSL line
status. The screen in
Figure 4-8-12
The page includes the following fields:
Object
WEB-GUI Action
WEB-GUI Port Number
SNMP Agent Action
SNMP Read Community
SNMP Write Community
SNMP Port
Bandwidth Counter
appears.
Figure 4-8-12: Out-of-Band Management Page Screenshot
Description
Allows user to disable or enable web GUI. Default: Enable
Allows user to set web GUI (HTTP service) port number. Default: 80
Allows user to enable or disable SNMP service. Default: disabled.
Allows user to set SNMP read community name. Default: "public".
Allows user to set SNMP write community name. Default: "private".
Allows user to set UDP port number. Default: 161.
Allows user to enable or disable xDSL port bandwidth counter. Default: disable.
User can check result from "Statistics/xDSL Port Bandwidth"
- 101 -