The page includes the following fields:
Object
Reboot with
Button
: Save configuration.
: Click to undo any changes made locally and revert to previously saved values.
: Click to reset IP address to default setting.
4.8.7 Location Information
This section is to introduce you about how to configure location information. This is for user to fill out related information for
identifying this device that is used for the project, site or wherever it is putted, etc. The screen in
Description
Allows user to set 4 reboot types.
None: system reboots only.
Save Configuration: System save configuration first, then reboot.
Factory Default: System reboots and makes factory default reset.
Factory Default without Network: System reboot is set to factory default.
Figure 4-8-7: Location Information Page Screenshot
- 95 -
Figure 4-8-7
appears.