Planet XDL-2420R User Manual page 49

 [VDSL] Annex C Band Plans
 [ADSL] Transmode
 [Dnstream] Max Rate (kbps)
 [Dnstream] Min Rate (kbps)
 [Dnstream] Msg Rate (kbps)
 [Dnstream] Max SNRM (0.1dB)
 [Dnstream] Min SNRM (0.1dB)
 [Dnstream] Target SNRM
(0.1dB)
 [Dnstream] Max Interleave
Delay (ms)
20. BP B8-10 998ADE17-M2x-NUS0-M
21. BP B8-11 998ADE17-M2x-A
22. BP B8-12 998ADE17-M2x-B
23. BP B8-13 998E30-M2x-NUS0
24. BP B8-14 998E30-M2x-NUS0-M
25. BP B8-15 998ADE30-M2x-NUS0-M
26. BP B8-16 998ADE30-M2x-NUS0-A
POTS-138B, POTS-276B, POTS-138CO, TCM-ISDN
Default: POTS-138B
ADSL transaction modes are listed as follows. Default: 1
1. Auto
2. G.992.1 Annex A
3. G.992.1 Annex B
4. G.992.3 Annex A
5. G.992.3 Annex B
6. G.992.3 Annex L Mode 1
7. G.992.3 Annex L Mode 2
8. G.992.3 Annex M
9. G.992.5 Annex A
10. G.992.5 Annex B
11. G.992.5 Annex M
12. G.992.1 G.992.3 G.992.5 Annex A
13. G.992.1 G.992.3 G.992.5 Annex B
14. G.992.3 G.992.5 Annex M
15. G.992.3 G.992.5 Annex A Annex M
Allows user to configure downstream maximum rate from 32 to 200000.
Default: 20000
Allows user to configure downstream minimum rate from 32 to 200000.
Default: 32
Allows user to configure downstream rate from 4 or 248 kbps. Default: 16.
Allows user to configure downstream SNR margin maximum from 60 to 310.
Default: 310dB
Allows user to configure downstream SNR margin minimum from 0 to 60.
Default: 0dB
Allows user to configure downstream target SNR margin from 0 to 310.
Configured acceptable SNR margin. If the SNR margin is above this value,
the CO should attempt to reduce its power output to optimize its operation.
Default: 80dB
Allows user to configure maximum downstream interleave delay from 0 to
63ms. Interleave Delay defines the mapping (relative spacing) between
subsequent input bytes at the interleave input and their placement in the bit
stream at the interleave output.
- 49 -