Installing And Configuring The Hardware Raid Adapter Card - Siemens SIMATIC IPC1047 Operating Instructions Manual

5. Loosen the screws
graphics card
6. Remove the support adapter
⑥
Installation
Proceed in the reverse order for the installation of the graphics card. In step 3, push the card
retainer fully forward and downward onto the support adapter. Ensure that the support
adapter is fully inserted into the groove of the card retainer as shown.
6.5.6

Installing and configuring the Hardware RAID adapter card

Requirement
For installation of the Hardware RAID adapter card, you require the following:
● Tx10 screwdriver
● The hardware RAID adapter card with connection for the SAS/SATA data cable
connection for the capacitor block of the ZMM
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
⑤
on the
④
.
forwards.
Expanding and assigning parameters to the device
②
6.5 Expansion cards
①
and
69