Siemens SIMATIC IPC1047 Operating Instructions Manual page 94

Device maintenance and repair
7.6 Installing the software
Procedure
Note
The firmware settings might have to be changed in order for the device to boot from the
provided USB stick.
You can find additional information on this in the description of the firmware/BIOS for the
device.
NOTICE
Risk of data loss
Files, user settings as well as existing authorizations and license keys are lost when the
operating system is installed!
• Back up your data before installing the operating system.
1. Insert the provided USB stick into the device.
2. Reboot the device.
3. Boot with the provided USB stick in the Boot mode you have set beforehand.
4. In the Windows Boot Manager, select the "Recovery Microsoft Windows ..." option and
confirm the selection.
The Windows installer starts after a few seconds.
5. Follow the instructions on the screen.
Note the following information.
94
Operating Instructions, 09/2018, A5E45118479-AA
SIMATIC IPC1047