Siemens SIMATIC IPC1047 Operating Instructions Manual page 86

Hide thumbs Also See for SIMATIC IPC1047:

Table of Contents

Device maintenance and repair

7.5 Removing and installing hardware

NOTICE

Damage to the battery

Grease residues from your hands damage the battery.

• Do not touch the battery with your hands.

• Use suitable gloves, for example.

Note

The configuration data of the device may be deleted after battery replacement, depending on

the BIOS setting. With BIOS setting "Profile: User", the configuration data of the device is

retained; only the date and time must be set again.

1. Remove the battery from the socket

at the marked location.

2. Insert the new battery as shown.

3. Press the new battery centered into

the socket applying slight pressure.

Ensure that the battery is securely

seated.

4. Dispose of the old battery properly.

Further procedure

● Connect all cables.

● Close the device as specified in section "Open the device. (Page 52)".

● Set the BIOS setup.

The configuration data of the device may be deleted after a battery replacement

depending on the BIOS setup setting.