Siemens SIMATIC IPC1047 Operating Instructions Manual page 95

"Install Windows" installation program
The language of the installation program and the operating system is preset to English. You
can change the language of the operating system after the installation. Information on this
topic is available in the section "Setting up the language selection using the Multilanguage
User Interface (MUI)".
Setting up partitions and integrating storage controllers unknown to the operating system
You can set up partitions during the installation process and integrate storage controllers that
are unknown to the operating system. To do so, select "Custom (advanced)" when prompted
for the installation type in the "Install Windows" installation program.
The following dialog boxes are available:
Refresh
Load Driver
Drive options
(advanced)
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
Updating
Integration of controller drivers unknown to the operating system and required for
installation. Please read the information in the section "Information for systems
with RAID or AHCI controller".
Display of additional functions that you can use to set up the data storage media,
see the following figure.
Device maintenance and repair
7.6 Installing the software
95