Pump Flush; Plumbing Diagram - Teledyne 10 Installation And Operation Manual

BioOptix™ 10
Appendix B Fluid Path Diagrams
B.4 Pump Flush
Figure B-6 Pump flush
B.5 Plumbing Diagram
B-4
A Pump Flush should be done whenever the system will be idle
for more than a few hours. (See sections 3.8 and 4.1.) The flush
removes salts from the Buffer in lines to the Mode knob (Figure
B-6).
To Pump Purge
Sample
Buffer
Buffer A Buffer B
A complete plumbing diagram can be found on the following
page.
Channel
Mode
Pump