Gradient-Type Blocks; Fluid Path For Load-Type Blocks - Manual Injections - Teledyne 10 Installation And Operation Manual

Figure B-4 Fluid path for Load-type blocks -
Manual injections
B.3 Gradient-type Blocks
Figure B-5 Fluid path for Gradient-type blocks
Manual injections do not operate the pump. The system pauses
for the operator to turn the Mode valve to the Manual Inject
position. The liquid sample is then forced through the injection
port on top of the BioOptix 10 system. The liquid sample is intro-
duced directly onto the column (Figure B-4).
Gradient blocks are similar to fluid-type blocks (Figure B-5). The
Buffer valve switches between buffers A and B to produce the
correct mix.
Sample
Buffer
Buffer A Buffer B
Appendix B Fluid Path Diagrams
Manual Sample Injection
Mode
Channel
Mode
Pump
To Waste
BioOptix™ 10
Column
Effluent
To Foxy
Column
Effluent
To Foxy
B-3