10.1 Paper Magazine
10.1.1 Paper Supply Section Assembly Replacement
Removal
1. Release the latches and open the paper
magazine.
2. Remove the six outside screws, two inside screws
and then the paper supply section assembly.
3. Remove each four screws and then the two
latches.
Installation
Installation is essentially in the reverse order of
removal.
10.1.2 Magazine Roller Release Arm Replacement
Removal
1. Remove the paper supply section assembly
.
(See Subsection 10.1.1)
2. Remove the E-ring, arm, spring and push rod.
Installation
Installation is essentially in the reverse order of
removal.
Distributed by minilablaser.com
Paper Magazine
Screws (2)
E-ring
10-3
Latches (2)
Paper Supply Section Assembly
Screws (6)
Arm
Spring
Push Rod
LII360
10
LII363
LII364