8.2 Scanner Section
8.2.18 Fixing Bracket Installation
Fixing Bracket Installation
1. Remove:
• Rear cover
(See Subsection 9.1.2)
• Scanner section front cover
.
(See Subsection 8.2.3)
2. Loosen the two screws and remove the fixing
bracket.
3. Loosen the screw and remove the carrier fixing
bracket.
4. Remove the two screws and three hex. socket
head bolts.
5. Lift the conjugate length variable section and
install the fixing bracket with the two screws.
Fixing Bracket Removal
Removal is essentially in the reverse order of
installation.
Distributed by minilablaser.com
.
Carrier Fixing Bracket
8-29
Hex. Socket Head Bolts (3)
Fixing Bracket
Screw
Screws (2)
Conjugate Length
Variable Section
Screws (2)
8
Z2522
Fixing Bracket
Screws (2)
Z2521