Printer Function Select (0528) - FujiFilm SP-3000 Service Manual

5.6 Printer Adjustment/Maintenance (05)

5.6.7 Printer Function Select (0528)

[Selection]
[Setup and Maintenance] → [05 Printer Adjustment/
Maintenance] → [0528 Printer Function Select]
1. Select "Both" for "Magazine" normally.
2. Select "YES" for "Registration".
NOTE: Select "NO" for "Registration" to use temporarily
when error "W-2414" or "W-2450" occurred.
3. Select "YES" for "Distribution".
NOTE: Select "NO" for "Distribution" to use temporarily
when error "W-2419"or "W-2455" occurred and
adjust the pipe slider position of the distribution
unit as described below. Large size prints
cannot be printed.
1) Open the magazine door.
2) Open the distribution section inner cover.
3) Align the " " marks on the pipe slider and
the distribution unit.
4) Close the distribution section inner cover.
5) Close the magazine door.
4. Select "No change" for "Cut interval".
NOTE: When paper overlap feed has been occurred,
select "Change" for "Cut interval". If the large
level is selected (from level 1 to level 2 or 3), the
cut interval is increased and the processing
ability is decreased.
5. Click the [OK] button.
• Operation returns to the menu screen.
Distributed by minilablaser.com
" " Marks
5-100
Pipe Slider
L21157