FujiFilm SP-3000 Service Manual page 572

8.2 Scanner Section
• The "Installation Medium Selection (C-030)"
dialog box appears.
12. Select "Install from HD to circuit board(s) in
scanner" and click the [Next >] button.
• The "Download start (C-041)" dialog box
appears.
13. Click the [Yes] button.
• The "Downloading to the GMB23 circuit board
(C-041)" dialog box appears.
14. If the GMB23 circuit board has been replaced,
click the [Yes] button. If not, click the [No] button.
• The "Downloading to the CTB23 circuit board
(C-042)" dialog box appears.
15. If the CTB23 circuit board has been replaced,
click the [Yes] button. If not, click the [No] button.
• The "Downloading to the CLE23 circuit board
(C-043)" dialog box appears.
16. If the CLE23 circuit board has been replaced, click
the [Yes] button. If not, click the [No] button.
• The "Downloading to the CPZ23 circuit board
(C-044)" dialog box appears.
17. If the CPZ23 circuit board has been replaced,
click the [Yes] button. If not, click the [No] button.
Distributed by minilablaser.com
8-27
8