FujiFilm SP-3000 Service Manual page 522

7.4 NC100AY Body Section
<Machine Data Reading after CYA23 Circuit Board
Replacement>
1. Record the carrier ID printed near the plug-in
connector of the carrier.
2. Install the carrier to the scanner.
3. Open the Menu 0446 "NC100AY Installation
Information Setup" screen.
4. Enter the carrier ID recorded by step 1 into the
"Carrier ID" box.
5. Click the [Setup] button.
6. Click the [OK] button.
Distributed by minilablaser.com
7-78
Carrier ID
Z2517