FujiFilm SP-3000 Service Manual page 909

19.3 Image Control Box
• The "File Copy (C-020)" dialog box appears.
11. Check version information and click the [Next >]
button.
• The "Installation Medium Selection (C-030)"
dialog box appears.
12. Select "Install from HD to printer" and click the
[Next >] button.
• The "Confirmation (C-040)" dialog box appears.
13. Click the [OK] button.
• The "Setup Completion (C-090)" dialog box
appears.
14. Click the [OK] button.
• If an optional software is used, the upgrade
screen appears.
NOTE: If the upgrade of the optional software is
necessary, refer to the Instruction Manual for the
optional software. If the upgrade is unnecessary,
click the [Cancel] button.
Distributed by minilablaser.com
19-17
19