19.3 Image Control Box
19.3.7 Program Download to GMC23 Circuit Board
When the GMC23 circuit board has been replaced,
download the parameter from the main control unit to
the circuit board.
1. Select "NO" for "Rack Auto cleaning" in Menu
0625 "Processor Operating Condition Setup".
2. Insert the FRONTIER 570 System (A1) Disk into
the CD-ROM drive.
3. Shut down the system by performing the post-
operational checks.
4. Turn the power switch of the Printer/Processor ON
and STANDBY to keep it to "STANDBY".
5. Press the scanner's START switch.
• After starting up Windows, "(L-001) Simple
Upgrade" screen appears.
6. Click the [OK] button.
Distributed by minilablaser.com
FRONTIER 570
System (A1) Disk
19-15
Z2043
19