FujiFilm SP-3000 Service Manual page 820

16.2 Processing Solution Replenishment System
Installation
Installation is essentially in the reverse order of
removal.
NOTE: • Connect the hoses securely
(See Subsection 15.2.9).
• Take care not to bend or twist the hoses when
connecting the hoses.
• Connect the inlet hoses to the tanks, then install
the tanks being careful not to pinch them between
the bracket and the tanks.
• After installation, perform Installation Menu "92
MIX REPL" and "93 PUMP AIR EXT" from the
operation panel on the LP5700.
Distributed by minilablaser.com
16-22
LII1173