List Of Abbreviations - Festo Smart cubic CPV-SC Series Manual

Contents and general instructions

List of abbreviations

Term
Additional pressure supply
plate
Blanking plate
Components
Connecting tubing
CP
CPVSC1
CPV-SC valve terminal
Electrical sub-base
End plate
Manual override
MP connection
(multipin connection)
Separator plates
Valve block
Valve plate
Festo P.BE-CPVSC-EN en 0112NH
The following product-specific terms and abbreviations are
used in this manual:
Meaning
Plate for additional pressurization and exhausting of the valve
terminal
Plate without valve function in order to fill an unused location
Common term for sub-bases, end plates, blanking plates, separ-
ator plates and valve sub-bases
Connecting the supply lines (tubing) to the CPV-SC valve terminal
Compact Performance
Size designations of the CPV-SC valve terminals and micro valve
sub-bases
Compact Performance valve terminal - Smart Cubic (type 80)
Sub-base with electric multipin connection
Termination plate at the left and right-hand ends of the CPV valve
terminal with channels or connections for supplying the valves
with compressed air and for conducting the exhaust air.
Manual override
Variant of valve terminal with 15-pin Sub-D plug or flat cable con-
nection. All valve solenoid coils are connected centrally via this
connection.
Plate for dividing the valve terminal into pressure zones
Basic unit with valve sub-base, blanking and end plates
Plate with single-solenoid or double-solenoid valve
IX