Index Of Abbreviations - Festo CPA-SC Series Manual

Contents and general instructions

Index of abbreviations

Term
Base block
Blanking plate
Components
Connecting the
tubing
CP
DI connection
FL connection
HC connection
Ident. code (I.C.)
Manual override
MP connection
Festo P.BE−CPASC−EN en 0808c
The following product−specific terms and abbreviations are
used in this manual:
Meaning
Sub−base:
Base for sub−base valves and blanking plates
With ports for supply air (1), (12/14) and exhaust air (3), (5), (82/84)
With work connections (2), (4)
With pressure compensation hole (L)
PRS manifold:
Base for semi−inline valves and blanking plates
With ports for supply air (1), (12/14) and exhaust air (3), (5), (82/84)
Without work connections
With pressure compensation hole (L)
Plate without valve function, for reserving valve locations.
Common term for base block, valve sub−bases and blanking plates
Connecting the supply lines (tubing) to the CPA−SC
Compact Performance
Variants of the CPA−SC valve terminal with field bus direct connection
DeviceNet"
CPA−SC valve terminal variant with 26−pin multipin plug strip for ribbon
cables as per DIN EN 60603−13. All valve solenoid coils are connected
centrally via this plug strip.
CPA−SC variant on which each valve sub−base has a horizontal connection.
Each valve is connected electrically with a special cable via this connection.
Identification code. This is usually printed on the relevant component.
The component can be identified with this code (see Tab. 1/12).
Manual override
CPA−SC valve terminal variant with 25−pin multipin sub−D connection.
All valve solenoid coils are connected centrally via this connection.
XIII