Remote Hydraulics; Remote Hydraulics - Kioti DK4810 Manual

5
 dk4810/5310/5810(HS)
-
7. However, if the draft control lever
is pushed forward to its end, the
lowest position of the lifting arm
can be lowered a little. on the other
hand, if the lever is pulled back to
its end, the highest position of the
lifting arm can be raised a little.
CAUTION
• If the lifting arm is properly
operated but abnormal noise
is still heard, the hydraulic sy-
stem may be malfunctioning.
In this case, let the engine idle
for an 10 to 15 minutes addi-
tionally and then try to start
the engine again. If the pro-
blem is still present, contact
your local KIOTI Dealer.
TD200-호주향-DK4810,5310,5810(HS)-024 24
CAUTION
• The implement may shake up
and down as the draft sen-
sor is under impact when the
tractor is passing over irregu-
lar ground with the middle or
lowest top link hole selected.
In this case, put the draft con-
trol lever to the "Deep" posi-
tion to decrease the sensitivity
of the draft function or select
the highest top link hole.
• If the tractor has been stored
for a long period of time or the
transmission fluid is just chan-
ged, abnormal noise may be
heard and the hydraulic lifting
arm may be inoperable tempo-
rarily. In this case, let the engi-
ne idle for 3 to 4 minutes.

REmOTE HyDRAUlICS

D O U b l E A C T I N G l E v E R ( I f
EqUIPPED)
(1) double Acting valve 1, lever 1
(2) double Acting valve 2, lever 2
(A) port A (c) port c
(B) port B (d) port d
td2O524a
2015-02-11 오후 2:59:15