6
dk4810/5310/5810(hs)
-
WARNINg
Make sure that the PTO safety
•
cover is in its position before
driving the PTO shaft.
Never go close to the rotating
•
PTO or tractor PTO shaft. A
severe accident can happen.
Before driving an implement
•
through the PTO, always make
sure that all bystanders are
well away from the tractor.
When using the PTO drive with
•
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
The tractor PTO and PTO shaft
•
should not be interfered by
any surrounding parts.
TD200-호주향-DK4810,5310,5810(HS)-08 8
WARNINg
Before starting up any PTO-
•
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the telesco-
pic section of the drive shaft
is engaged.
(1) pto cover
(A) Allowable Angle Of Universal Joint: 50˚
refer to the chart below as to instal-
ling of an universal joint.
The type of PTO shaft
sAe 1-3 / 8" 6 splines
Allowable angle of universal joint
50˚
M55O626A
2015-02-11 오후 3:07:29