the slow-blow fuse is to protect
electric devices and wirings. if the
ignition, preheat, charge or main fun-
ction is faulty, find and move its cau-
se and replace the fuse with a new
one.
slow-blow fuse
60a
IMPORTANT
•
Using a non-approved slow-
blow fuse can damage electrical
systems in the tractor severely.
•
Refer to the chapter "Trouble-
shooting" in this manual or
contact your local kIOTI Dealer
for specific information dealing
with electrical problems.
TD200-호주향-DK4810,5310,5810(HS)-035 35
REPlACING BUlB (AQ)
the bulbs and their capacity used
in this tractor are listed in the below
table. this section only describes
procedures the users can handle.
sequence
Bulb
Capacity
1
headlamp
35w/35w
2
Position lamp (front)
3
stop/Position lamp (rear) 21w/5w
4
turn signal lamp
5
work lamp
charging
instrument
warning
6
cluster
light
indicator
others
7
Backup lamp
hEADlAMP
5w
21w
(1) hood
21w
(a) Pull
1. turn the key switch to the "off"
3w
position and open the hood.
1.4w
10w
7
-
5
maintenance
td2O701A
(2) opening knob
(B) open
5 7
2015-02-11 오후 3:01:29