ADjusTMENT Of LIfT ROD
(1) lift rod
(2) turn Buckle
(3) lock nut
1. Adjust the implement balance by
turning the lift rod turn buckle.
2. After adjustment, secure it with the
lock nut.
TD200-호주향-DK4810,5310,5810(HS)-05 5
ADjusTMENT Of TOP LINk
td2O527A
(1) top link
(3) lynch pin
1. install the top link to the desired
hole, install the set pin and lynch
pin securely.
2. tighten the lock nut on the top link
securely after adjusting top link
length.
3-point hitch implement And loAder operAtion
ADjusTMENT Of CHECk LINk
td2O601A
(2) set pin
(1) check chain
(4) top link hook
(3) set pin
1. Adjust the check chain to control
horizontal sway of the implement.
it is also used to set the implement
on the back of the tractor in center.
2. to adjust the check chain, pull out
the turn buckle and adjust it until
the desired transverse moving di-
stance is obtained.
6
5
-
td2O529A
(2) turn Buckle
5 6
2015-02-11 오후 3:07:27