Kioti DK4810 Manual page 105

5
 dk4810/5310/5810(HS)
-
(1) Shuttle Shift lever
(3) Range Shift lever (Hi-lo)
(4) Main Shift lever
3. place the pTo switch to the "oFF"
position. (It cannot be started engi-
ne while the pTo is engaged)
4. Set the main, range and shuttle
shift levers in the neutral position.
TD200-호주향-DK4810,5310,5810(HS)-04 4
(1) position control lever
(A) "doWN"
5. lower the attachment by pushing
Td2o501A
the position control lever forward.
(2) pTo Switch
• make sure that no one is near
the implement or behind the
tractor.
Td2o502B
(1) clutch pedal
6. Set the hand throttle lever to the
WARNING
7. depress the clutch pedal. (It can-
td2O441a
"Slow" position. (In case of cold
weather you may adjust it to "Fast"
for easier starting)
not be started engine when the
clutch is not depressed)
2015-02-11 오후 2:59:07