5
-
pX7520 / pX9020 / pX1002
REmOTE HYDRAUlIC
DOUblE ACTING vAlvE
(1) double Acting lever
(A) port A
(b) port b
(c) port c
(d) port d
TG110-AU-05.indd 24
pressure
Port
A
In
lever 1
b
out
c
In
lever 2
d
out
Coupler size
Port A, b, C, D
KIOTI supplies two types of the
double acting valves by region : self-
return type and detent type.
• For the self-return type double act-
ing lever, it returns to its neutral
position to block the hydraulic fluid
when it is pushed/pulled and then
released. Therefore, this type of
double acting valve lever should
be pulled or pushed continuously
TG1O525A
for operation which is suitable for
an implement with a short operat-
ing time, such as the hydraulic cyl-
inder.
Returning
• For the detent type double act-
Push
Pull
ing valve lever, it keeps its posi-
out
tion after it is pulled or pushed to
a certain position. Therefore, it is
In
not necessary to hold the lever to
out
a certain position which is suitable
for an implement with a long oper-
In
ating time, such as the hydraulic
motor.
½ inch
•
Put the detent valve operating
lever into the neutral position
when the hydraulic implement
is not in use. If the detent
valve is kept in the operating
position for an extended pe-
riod of time, the relief valve is
kept open and the temperature
of the hydraulic fluid rises,
leading to damage of various
hydraulic parts, such as the
oil seals and O-rings.
WARNING
2013-01-22 오전 10:30:00